Exactly how to upgrade the Jeep Wrangler with led interior light kit

In this post, we're mosting likely to be having a look at a 2019 new LED interior set for the Jeep JK Wrangler. This obtain includes plug-and-play replacements for your dome map and also license plate lights. It's also available in a variety of color temperature levels as well as result degrees. it can be set up in your home in your garage with fundamental hand tools and only takes a couple of mins. Simply that easy.

We get accessibility to the stock map lights. We will certainly go on as well as use a plastic tree removal tool to remove this plastic cover and it need to stand out off conveniently. Then simply set that apart, we'll remove our factory light bulbs, simply pull on them a little bit as well as they should come right out.

Next, we would advise wearing handwear covers at this moment because these bulbs will get hot, you can after that plug in your T10 LED replacement bulbs.



Before reinstalling that plastic cover, you can go on and check them for function and after that simply slide that plastic cover right back on.


With our map light completed, we can currently relocate backwards for the dome light to access your factory dome light. We will utilize that same plastic trim removal device to remove this plastic cover push in and down from the side as well as it must come right out.

The clear plastic cover does not in fact come all the way off for the dome light and if this black shroud comes off too don't be startled. That's totally regular, it merely clips back in with four tabs, two on either side to take out your manufacturing facility dome light.


You'll simply pull out these little tabs on either side and the bulb ought to slide right out. Before you place your brightest t10 led bulb upgrade in, go on and squeeze on these tabs somewhat so that the light bulb is protected and also good. Go in advance and stand out in your led replacement light bulb with our interior led bulbs when you pop it in with that done.

After completed, we can proceed and proceed to the license ate. Until now, the installment of your license plate light bulb canpl not be any less complicated. You will pinch 2 tabs on either side of the license plate housing and also transform counterclockwise to launch it.


You'll remove your stock light bulb as well as plug in your T10 LED canbus replacement light bulb. This light bulb is much better to be non-polar sensitive so we do not require to inspect the connection. Once you make certain that it's connected correctly, re-secure the housing, and also you're finished with your new LED package set up. You'll currently appreciate much better presence and an awesome clean contemporary look.